{"product_id":"masterchem-kilz-mold-mildew-interior-exterior-primer-copy","title":"Masterchem KILZ® Over Armor®  Solid Color Deep Base","description":"\u003cdiv style=\"text-align: start;\" class=\"icon-item\"\u003e\n\u003cp\u003e\u003cspan\u003eKILZ Over Armor® Smooth Coating is designed to bridge cracks, hide imperfections, and give a uniform look to old, weathered wood. KILZ Over Armor Smooth Coating can also be used over cracked and weathered concrete. Available in limited “wood stain” and “concrete” colors. Ideal for properly prepared weathered or cracked horizontal wood and composite surfaces such as decks, porches and boat docks, as well as concrete surfaces like pool decks, patios and sidewalks. Also for vertical surfaces such as railings and posts. Not for driveable surfaces such as garage floors or driveways. Two (2) Coats Required for Optimal Durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePREPARATION\u003csup\u003e†\u003c\/sup\u003e\n\u003c\/h3\u003e\n\u003cp\u003eTHE FOLLOWING STEPS AND PRODUCTS ARE REQUIRED:\u003cbr\u003eWood Surfaces:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eReplace rotting or unstable boards and remove loose splinters. For failing coatings  or to remove loose wood fibers, use a wood stain and finish stripper followed by a wood cleaner and brightener to neutralize the wood.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhen a wood stain and finish stripper is not needed, a wood cleaner and brightener MUST be used to remove mill glaze and clean the wood surface. After using either a wood stain and finish stripper or a wood cleaner and brightener, rinse thoroughly with a garden hose or pressure washer.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhen rinsing with a pressure washer, use the broadest spray pattern while keeping the nozzle at least 24\" away from the surface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAllow the area to dry at least 24 hours before coating. Lightly sand to remove remaining wood fibers\/fuzz.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConcrete Surfaces:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAvoid areas that are structurally weak or subject to hydrostatic pressure.\u003c\/li\u003e\n\u003cli\u003eAllow new surfaces to cure for 30 days.\u003c\/li\u003e\n\u003cli\u003eUse a concrete and masonry paint stripper to remove peeling film.\u003c\/li\u003e\n\u003cli\u003eUse a concrete and masonry cleaner and etcher to clean and etch uncoated concrete or a concrete and masonry degreaser and cleaner on sound, coated surfaces prior to coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAPPLICATION\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eUse product when air and surface temperatures are between 50-90° F (10-32° C). Avoid applying in direct sunlight or to hot surfaces. Do not use if rain is expected within 24 hours. The surface must be completely dry before application. Avoid painting if humidity is expected to be greater than 80%. Intermix multiple containers to ensure color uniformity. Stir product occasionally throughout application. DO NOT THIN PRODUCT. For nail holes and cracks up to 1\/4\", completely fill in with Over Armor Smooth using a nylon\/polyester brush and allow to dry prior to rolling. Deep nail holes and cracks may require additional filling. For edges, corners and in between wood boards, apply using a nylon\/polyester brush. Use pressure while rolling and apply a generous, even coat using a 1\/2\" nap roller. For a smoother texture, use a brush or thinner nap roller (i.e. 1\/4\"). For vertical surfaces such as railings, use a nylon\/polyester brush or roller and apply two thin coats at a spread rate of 400 sq. ft. per gallon. Airless spray is recommended for experienced applicators only; use a .027\"- .035\" tip with no filter at 2400-3200 psi. When spraying vertical surfaces, apply a very thin coat (one pass only) and do not back brush\/roll. When spraying horizontal surfaces, follow the standard spread rate of 75 sq. ft. per gallon. For optimum performance, film uniformity, leveling and to cover cracks, a second coat MUST be applied. Maintain a wet edge when applying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOVERAGE:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e75 sq. ft. per gallon based on recommended 2 coats per project.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDRY TIME:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4-6 hours before recoat. Dries to touch in 4 hours. Wait 24-48 hours before light foot traffic. 72 hours to full cure. Additional dry time may be needed in cooler temperatures and higher humidity. Premature heavy traffic will cause coating failure.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCLEAN UP \u0026amp; DISPOSAL\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eClean equipment and paint spatters with warm, soapy water. If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current governmental regulations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDo not dispose of this product down a drain. Please consider donating any unused product. For recycling or disposal information contact your local household refuse collection service.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCAUTIONS \/ LIMITATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eProtect from freezing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDo not use without the addition of tinting colorants\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDo not use if rain is expected within 24 hours\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDO NOT THIN PRODUCT\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAvoid applying paint in direct sunlight or hot surfaces\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTest product for color on a small hidden area before proceeding\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePainted surfaces may become slippery when wet\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eShelf life under normal conditions is 2 years (unopened containers)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDo not use on drivable surfaces such as garage doors and driveways.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTemperature Range: 50-90°F (10-32°C)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e","brand":"Masterchem Industries","offers":[{"title":"Gallon","offer_id":43616304988342,"sku":"225223","price":62.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0648\/0658\/4502\/files\/product-media-390313.png?v=1770934716","url":"https:\/\/shop.spencehardware.com\/products\/masterchem-kilz-mold-mildew-interior-exterior-primer-copy","provider":"Spence Hardware \u0026 Supply","version":"1.0","type":"link"}